Bare Tool - Battery and Charger not included

Features:

• 40Vmax XGT BL Brushless Cordless Wood/Bolt/T-Mode 220 N·m (1,950 in.lbs.) Impact Driver
• More comfortable operation in a wide range of applications from light-duty screw tightening to heavy-duty metal fastening
• Dual spring technology
• The hammer is designed to be driven by a dual spring unit consisting of two types of springs with different load capacities
• The hammer is driven by one spring in light-duty operation, and by two springs in heavy-duty operation. Thus, the impact power is adjusted according to the workload, providing added comfort in a wide range of applications from delicate screw tightening to heavy-duty metal fastening
• The above-mentioned optimal impact blow suppresses increase in recoil and vibration, which occur after the tool starts impact blow
• (The two effects have been confirmed through the tests using 120 mm coarse thread screw)
• 4 LEDs on the front of tool head
• Brighter illumination on the workpiece obtained by:
• locating 4 LEDs on the front of tool head
• reducing projections that project from both sides of tool head and body
• Higher visibility of the workpiece achieved by using a newly designed LED lens to make the shadow of bit lighter
• With preglow and afterglow functions
• 3 brightness settings
• Increased screw tightening speed
• Compared with our current models, increased screw tightening speed has been achieved by increasing the number of impacts in Mode 4 (Max impact mode)
• New appearance design
• The current design has been changed by adding camouflage pattern and more
• Light mode
• To turn on the light, set F/R change lever in the neutral position and pull the switch trigger. To turn off the light, pull the switch trigger again
• The light turns off automatically one hour after turned on
• New one-touch bit installation
• Reduced resistance allows for easier bit installation
• High Power 220 N·m
• Genuine solution for high demand industrial users
• Having excellent ability to perform heavy-duty continuous tightening; Able to continuously tighten heavy duty screws such as metal fastening screws or lag screws
• Multiple operation modes for a wide range of applications; 4-speed power selection plus 6 Assist modes (2 T-modes, 1 Wood mode, 3 Bolt modes)
• Improved bolt modes for more convenience in tightening machine screws
• Constant speed control maintains fastening torque by minimizing the rotation speed reduction caused by decreased battery capacity
• One-touch speed selector provides precise fastening control for a wide range of applications
• Enhanced anvil holder rigidity; Material change from Needle bearing to Ball bearing provides reduction of bit wobbling
• Variable speed control by trigger for precise fastening in a wide variety of applications
• Ergonomically designed handle with rubberized soft grip for increased comfort
• Reversing switch is conveniently located
• Auto-stop in bolt mode (both in Forward/Reverse rotations)
• Electric brake for maximum productivity
• Trigger lock minimizes accidental start-up during transportation
• Durable, reversible belt clip convenient for temporary tool hanging
• eXtreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
• Battery protection circuit protects against overloading, over-discharging and over-heating

Specifications:

CAPACITY	Machine screw: M4 – M8 (5/32 – 5/16″)
	Standard bolt: M5 – M16 (3/16 – 5/8″)
	High strength bolt: M5 – M14 (3/16 – 9/16″)
	Coarse thread (in length): 22 – 125 mm (7/8 – 4-7/8″)
	Steel: 22 mm (7/8″)
	Wood (Auger bit): 24 mm (15/16″)
HOLE SAW DIAMETER	38 mm (1-1/2″)
HEX SHANK	6.35 mm (1/4″)
SHANK/DRIVE	Hex Shank 6.35 mm (1/4″)
NO LOAD SPEED (RPM)	Max / Hard / Med. / Soft / Wood / Bolt (1) / Bolt (2) / Bolt (3) / T (1) / T (2) mode: 0 – 3,700 / 0 – 3,200 / 0 – 2,100 / 0 – 1,100 / 0 – 1,800 / 0 – 2,700 / 0 – 3,700 / 0 – 3,700 / 0 – 2,900 / 0 – 3,700
IMPACTS PER MINUTE (IPM)	Max / Hard / Med. / Soft / Wood / Bolt (1) / Bolt (2) / Bolt (3) / T (1) / T (2) mode: 0 – 4,600 / 0 – 3,600 / 0 – 2,600 / 0 – 1,400 / 0 – 4,600 / N/A / 0 – 4,600 / 0 – 4,600 / N/A / 0 – 2,600
FASTENING TORQUE	Hard / Med. / Soft: 170 / 50 / 20 N·m (1,510 / 440 / 180 in.lbs.)
MAX FASTENING TORQUE	220 N·m (1,950 in.lbs.)
MAX OUTPUT	500 W
VIBRATION LEVEL	Impact tightening of fasteners of the maximum capacity of the tool: 12.9 m/s²
VIBRATION K FACTOR	1.5 m/s²
SOUND PRESSURE LEVEL	94 dB(A)
SOUND POWER LEVEL	105 dB(A)
NOISE K FACTOR	3 dB(A)
DIMENSIONS (L X W X H)	w/o Battery: 119 x 86 x 197 mm (4-11/16 x 3-3/8 x 7-3/4″)
	w/ BL4020 / BL4025: 119 x 86 x 247 mm (4-11/16 x 3-3/8 x 9-3/4″)
	w/ BL4040: 119 x 86 x 252 mm (4-11/16 x 3-3/8 x 9-7/8″)
	w/ BL4050F: 119 x 86 x 278 mm (4-11/16 x 3-3/8 x 11″)
	w/ BL4080F: 119 x 86 x 297 mm (4-11/16 x 3-3/8 x 11-3/4″)
NET WEIGHT	1.7 – 2.9 kg (3.7 – 6.4 lbs.)